|
|
|
Xcam / Ultracam
You can buy fast and cheap at our SPONSOR :
http://www.ma-cox.com
CLICK and GO !!!
Software and Firmware
- X crypto 1.27 -( 03/05/2005 )-
All fixed
- Orion 2.019 -( 03/05/2005 )-
All fixed
How to use:
for the latest version of xcam upgradable also with laptop
( you can recognize them, because in CI menu at the end of software
name you can read a P like xcripto 1.090-p),
just upgrade like others xcam firm using serial progger.
For oldest versions without P, you have to upgrade the bootloader,
with the file xcloader.rom
Use the same program and select block 0....
but you don't have a blok 0 in xcloader program ,
you have only number from 1 to 15....so select block one (1)
and cancel the number 1 replacing it with number 0; so block 1 is became block 0.
So start the upload , at the end after restart you will see the P letter in ci menu
now your xcam is upgradable also with a laptop,
because you have changed the old bootloader with the last one!
After do that, update the cam in the usual way with the bin file.
( Notice get from : LUCIFERSAT )
Downloading Main Program
- 1 Select the download file and set the block item to Block2
- 2 Press connect button, then the following message will pop-up
- 3 Select Update item from CI menu of STB
- 4 Press OK key of STB to Activate loader
- 5 Wait until Transfer Done! Xcloader program
Downloading Key Table
- 1 Select the key table file softcam.key and set the block item to
Block14
- 2 Press Connect button, then the following message will pop-up
- 3 Select Update item from CI menu of STB
- 4 Press OK key of STB to Activate loader
- 5 Wait until Transfer Done! message on Xcloader Program
|
|
|
| |
|