ASTON SIMBA's
HOW TO FLASH WITH RJ45
|
We can do that with "Loader.exe",
we will try to explain easy:
- Switch off the decoder with main switch
- Must be bypass pins 6 and 7 of RJ45
(on table JUMPER1)
- Create in your hard disk a called directory " simba " ,
and put inside the files "appli.txt" and "loader.exe".
- Star yuor PC with start/disk, and go to " simba " directory
and star the Loader
- Select a port (COM1 or COM2),
and speed (option "2" = 115200)
Next menu with yellow letters,
- Switch ON the decoder, all leds stay on
It's corrrect and ready for flashing !!!
-Now in the next menu with gray letters,
chose opcion "2"
- Ask you a password, insert " mmjd "
and it will response " OK ".
After ...
come out : " SEND FILE : ", chose a ?.txt file
send with F1, the last it's "ana.txt" or a old "appli.txt",
included in the zip file,
and "ENTER".
- Simba's leds start to blink.
- Now wait about 20 minutes
- REMEMBER DON'T TOUCH THE KEYBOARD -
- Check if the Simba's leds are blinking,
like uplaod new soft from satelite.
When it's finish, switch OFF the decoder from main switch,
and TAKE OUT the bypass pins 6/7 on RJ45.
- It's ALL
- When the process it's finish, we have on the pc menu,
with gray letters :
BOOT LOADER SeBOOT Sload: 1
APP Sload : 2
APP Bload : 3
run appli : 4
For check if the new soft it's in the decoder,
go in STANDBY from remote control,
chose " OK ", enter in
"INFO OF YOUR TERMINAL",
and check if you have : V. Appli 40033
it's the confirmacion that you have a new soft.
Your Simba now it's :
MULTICAM
Softs, photos and details are in the Aston's menu on the web
|