|
On 9800 and 9902
there is a problem, the cam is not recognized all time at bootup, and few
peoples have reported that the Joker and ICECrypt (BLACK) modules may be
destroyed at power-up.
After few
investigations on PCMCIA socket, it apears that when you put your STB in standby
the 5V is shuted down, but few data lines remains actives.
With this
hardware modification to the STB the cam is recognized at 100%, and this solve
the potential cam crash ( The eeprom corrupted because the power is removed on
the cam with data lines actives ).
This modification
keep the c.i. interface power under ( at 4.3V ) during standby, and remove spikes
at power on.
NOKIA 9902S
NOKIA 9800S
You can conect from welding marked as "RC56"
Some peoples have
also reported problems to flash the Joker and ICECrypt (BLACK) on 9800 and 9902.
Excepted this problem the Joker work really good on these STB, zapping faster
and more stable.
This modification can also help with MM + Clones and old
type Irdeto Freecam, NO more catastrophic results ( freeze, hang, missing
channels... ).
|